Pressure Calibration Equipment
01
Corporate Headquarters
2900 Saturn St #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20230904
Additel 100-HTK Series
Additel Hose Test Kits
Hand-tight quick connectors
Conveniently extend pressure calibrations
5 ft hose length
Maximum pressure: 8,000 psi (550 bar)
Hose length: 5 ft (1.5 m)
Burst pressure: 15,900 psi
Internal hose material: Polyamide
ORDERING INFORMATION
Model Number
Pressure Port Type:
NPTM4 - 1/4NPT male
NPTM2 - 1/2NPT male
BSPM4 - 1/4BSP male
BSPM2 - 1/2BSP male
M20M - M20x1.5 male
Pressure Port Type:
NPTF2Q - 1/2NPT female quick connect
NPTF3Q - 3/8NPT female quick connect
NPTF4Q - 1/4NPT female quick connect
NPTF8Q - 1/8NPT female quick connect
BSPF2Q - 1/2BSP female quick connect
BSPF3Q - 3/8BSP female quick connect
BSPF4Q - 1/4BSP female quick connect
BSPF8Q - 1/8BSP female quick connect
M20FQ - M20x1.5 female quick connect
ADT100 NPTM4 NPTF4Q
HTK
8K
Pressure Range:
8K - 8,000 psi (550 bar)
15K - 15,000 psi (1,000 bar)
ADT100-HTK-8K
ADT100-HTK-15K
The Additel 100 series High Pressure Hose Test Kits are designed to extend your pressure calibrations to a convenient
location to adapt from one pressure connection to another. Each test kit has 5 feet of exible hose rated to 8,000 psi
(550 bar) or 15,000 psi (1,000 bar) which connects a male NPT, BSP, or Metric connector to a variety of female quick
connectors. Additel's specially designed quick connectors allow for hand-tight connection without the need for wrenches
or Teon tape. The Additel 100 series Hose Test Kits are a great accessory to any pressure pump or controller.
OVERVIEW
Maximum pressure: 15,000 psi (1,000 bar)
Hose length: 5 ft (1.5 m)
Burst pressure: 43,500 psi
Internal hose material: Polyoxymethylene
Note: The estimated End of Life (EOL) expectancy for all hoses and filters (pneumatic and hydraulic) is
approximately 10 years and should be replaced at the rst sign of wear or damage.