Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Fax: 714-998-6999 Email: sales@additel.com

Rev # 20210616

Multifunction Documenting Process

Calibrators

Additel 221A, 222A & 223A

Sourcing, simulating and measuring pressure, temperature

and electrical signals

Smartphone-like menu and interface for simple operation

HART Communication capability (223A)

The internal cold junction compensation sensor can be re-

calibrated at the ice point

Ultra-compact, 3.9" x 7.6" x 2.0", and 1.6 lb (0.7 kg)

OVERVIEW

This series of highly integrated multifunction calibrators feature several patented technologies. These are an ultra-

compact, rugged, and easy to use hand-held device for sourcing, simulating and measuring pressure, temperature, and

electrical signals. Their smartphone-like menu and interface make the operation simple. Automation and documentation

capabilities make the these calibrators a turnkey solution.

Additel 221A

The Additel 221A is very unique to the multifunction temperature calibrator market. Not only does it provide you with the

ability to source, simulate and measure temperature and electrical functions but it also incorporates full documenting

capability and many other solutions other competitors do not provide. As a standalone device, you can create tasks, run

tests and store the results. With the use of Additel/Land Software or Additel/Cal software, all saved tasks and data can

be downloaded and managed. With it's unique internal cold junction compensation sensor, cold junction compensation is

very simple and easy.

Additel 222A

The Additel 222A Multifunction Process Calibrator takes all the functionality of the 221A and adds the ability to measure

and source pressure using the ADT160A Intelligent Pressure Modules. With calibration characteristics programmed

directly into the ADT160A pressure modules, you can simply connect them to the 222A and it will automatically recognize

and display the module as the source or measure pressure. For ultimate convenience, the 222A allows for modules to be

"hot swapped" with a simple connection at the top of the module.

Additel 223A

The 223A has all the capability of the 221A and 222A and HART Communication in one small, easy-to-use package.

The 223A has a full HART library that allows for the reading of HART-smart devices and also the capability to write to

devices. Combined with full task automation and documentation, the 223A is an ideal tool to accomplish many of your

important calibration tasks.

Sourcing, simulating and measuring temperature and electrical

signals

Sources and measures mV, mA, ohms, RTDs,

thermocouples, frequency, and pulses

Simulates and measures 13 thermocouples and 11

RTDs to calibrate transmitters

Measures and sources pressure using Additel 160A

series Intelligent Digital Pressure Modules from -15 psi

to 10,000 psi (-1 bar to 700 bar)

24V loop power supply

Simultaneous dual reading capability

Automatic switch test

Supports square root transmitter

Pulse frequency output for the calibration of ow totalizer

Easy to use

Smartphone-like menu and interface make the operation

simpler and easier

Ultra-compact, size 3.9" x 7.6" x 2.0" (100mm x 192mm

x 52mm), and weight 1.6 lb (0.7 kg)

One handed operation

Calibrated cold junction compensation (Patented)

Cold junction equalizing block in the calibrator

A calibrated PRT element with flexible leads is

installed

in the equalizing block for thermocouple cold junction

compensation

This PRT element can be pulled out from the calibrator

and re-calibrated and corrected at the ice point

Documenting and automated procedure capability

Manage the information of the device under test.

Set up automated calibration procedures, and 223A

performs the test, calculates the errors, displays and/

or stores the results in the memory, and highlights the

out-of-tolerance points.

As-found and As-left functions allow recording and

documenting results for quality control.

Download tasks and upload the results.

Snapshots allow you to capture and save data.

ISO 17025 accredited calibration with data

FEATURES

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Fax: 714-998-6999 Email: sales@additel.com

Rev # 20210616

SPECIFICATIONS

Electrical Specifications

General Specifications

Measurement Accuracy

Range Resolution Accuracy

Voltage DC

±75.0000 mV

0.1μV 0.01%RD + 3.75 μV

±30.0000 V 0.1 mV 0.01%RD + 1.5 mV

Current DC

± 30.0000 mA 0.1μA

0.01%RD + 1.5 μA

Resistance

Two-wire 0 to 400.000Ω 1 mΩ 0.02%RD + 0.02Ω

Three-wire 0 to 400.000Ω 1 mΩ 0.02%RD + 0.02Ω

Four-wire 0 to 400.000Ω

1 mΩ 0.01%RD + 0.02Ω

Two-wire 0 to 4000.00Ω 10 mΩ 0.02%RD + 0.2Ω

Three-wire 0 to 4000.00Ω 10 mΩ 0.02%RD + 0.2Ω

Four-wire 0 to 4000.00Ω

10 mΩ 0.01%RD + 0.2Ω

Frequency 1 to 50000.0 Hz 0.1 Hz 0.005%RD + 1 Hz

Pulse

0 to 999999 1

N/A

Limit Switch

For the contact with potential, the voltage within the

range 3 V to 24 V.

Temperature Specification

Thermocouple Measurement and Source Accuracy

Measure

and Simulate

Standard Temperature Range (

Accuracy (

Measure Source

S IEC 584

-50 to

1768

-50 to400 1.0 1.1

400 to 1000 0.6 0.6

1000 to1768 0.7 0.8

R IEC 584

-50 to

1768

-50 to 200

1.4 1.4

200 to 500 0.6 0.6

500 to 1768 0.6 0.7

B IEC 584 0 to 1820

50 to 450 3.8 3.8

450 to 800 0.9 0.9

800 to 1820

0.6 0.7

K IEC 584

-270 to

1372

-250 to -200 1.0 1.1

-200 to -100 0.4 0.5

-100 to 600 0.3 0.3

600 to 1372 0.4

0.5

N IEC 584

-270 to

1300

-250 to -200 1.5 1.6

-200 to -100 0.5 0.6

-100 to 1300 0.4 0.5

E IEC 584

-270 to

1000

-250 to -200 0.6

0.7

-200 to -100

0.3

-100 to 0 0.2 0.2

0 to 700 0.2 0.3

700 to 1000 0.2 0.4

J IEC 584

-270 to

1200

-210 to -100 0.3 0.3

-100 to 1200 0.3

0.4

IEC 584

-270 to

400

-250 to -200 0.8 0.9

-200 to 0 0.4

0.4

0 to 400 0.2 0.2

ASTM

E988

0 to 2315

0 to 1000 0.5

0.5

1000 to 1800 0.7 0.9

1800 to 2315 1.0 1.4

ASTM

E988

0 to 2320

0 to 100 0.5 0.5

100 to 1100 0.4 0.5

1100 to 2000 0.6 0.9

2000 to 2320 0.9 1.3

ASTM

E1751

0 to 2315

0 to 200 2.4

2.4

200 to 400 0.5 0.5

400 to 1400 0.4 0.5

1400 to 2315 0.7 1.0

DIN43710

-200 to

900

-200 to -100 0.2 0.3

-100 to 400 0.2

0.2

400 to 900 0.2 0.3

DIN43710

-200 to

600

-200 to 0 0.4 0.4

0 to 600 0.2 0.3

Source Accuracy

Range Resolution

Accuracy

Voltage DC

-10.000 to 75.000 mV 1 μV 0.02%RD + 4.25 μV

0 to 12.0000 V 0.1 mV 0.02%RD + 0.6 mV

Current DC 0 to 22.000 mA 1 μA 0.02%RD + 1.1 μA

Resistance

1 to 400.00 Ω 10 mΩ 0.02%RD + 0.02Ω

1 to 4000.0 Ω 100 mΩ 0.03%RD + 0.4Ω

Frequency 0 to 50000.0 Hz 0.1 Hz 0.005%RD + 1 Hz

Pulse 0 to 999999 1 N/A

DC24V

(MAX 50mA)

24 V N/A 0.5 V

Environmental Specifications

Operating Temperature -10°C to 50°C

Storage Temperature -20°C to 60°C

Humidity <90%, non-condensing

Safety Specifications

European Compliance CE Mark

Mechanical Specifications

Display 3.5 inch TFT color screen

Electrical Connection Ø4mm sockets and at mini-jack thermocouple socket

RS232 Interface Standard RS232-DB9 socket

Size 3.9" x 7.6" x 2.0" (100 mm x 192 mm x 52 mm)

Weight 1.6 lb (0.7 kg)

Power Supply Polymer Li-ion rechargeable battery,or 10 V DC adapter

Battery Rechargeable Li-ion battery (included)

Battery Life

15 hours uninterrupted use

Battery life will be reduced when 24 V is applied

Battery Charge 110 V/220 V external power adapter (included)

Pressure Specification(222A & 223A)

The 160A series Intelligent Digital Pressure Modules are available for

gauge, vacuum and absolute pressure from -15 psi to 10,000 psi (-1 bar to

700 bar). Accuracy from 0.02% FS includes operation over 14°F to 122°F

(-10°C to 50°C), one year stability and calibration uncertainty. For detail

specication refer to pressure modules datasheet.

Built-in temperature readout

CVD coefcients of a calibrated PRT can be input into

the calibrator for accurate temperature measurement.

Multi lingual interface

English, German, French, Italian, Spanish,

Portuguese, Simplied Chinese

(Traditional Chinese, Japanese and Russian are

available per request)

Build-in unit conversion tool

Build-in converters for pressure units, temperature

units, temperature vs. resistance (RTDs), and

temperature vs millivolt (thermocouples)

Warranty: 3 years

HART Communication capability (223A)

Support HART

instrumentation

Display

3.5 inch TFT color screen

Misuse protection

Up to 30V voltage on any two sockets and up to

1A current on current sockets will not damage the

calibrator. The calibrator will return to normal condition

as soon as the voltage or current is removed.

Rechargeable battery

Rechargeable Li-ion battery for 15 hours uninterrupted

use.

Battery life will be reduced when 24 V is applied.

The rechargeable battery is replaceable.

*Accuracy with external cold junction; for internal cold junction add 0.1°C (k=2)

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Fax: 714-998-6999 Email: sales@additel.com

Rev # 20210616

SPECIFICATIONS

ORDERING INFORMATION

Measurement Accuracy

Measure and Simulate

Standard Temperature Range (°C)

Accuracy (°C)

Measure (2W/3W) Measure (4W) Source

Pt10(385) IEC 751 -200 to 850

-200 to 200 0.65 0.60 0.65

200 to 600 0.82 0.72 0.82

600 to 850 0.96 0.82

0.96

Pt100(385)

IEC 751 -200 to 850

-200 to 200 0.15 0.1

0.15

200 to 600 0.26 0.16 0.26

600 to 850 0.34 0.20 0.34

Pt100(3916) JIS 1604 -200 to 850

-200 to 200 0.15 0.1 0.15

200 to 600 0.26 0.16 0.26

600 to 850 0.33 0.20 0.33

Pt100(3926) Minco Application Aid #18 -200 to 850

-200 to 200 0.15 0.1 0.15

200 to 600 0.26 0.16 0.26

600 to 850 0.33 0.20 0.33

Pt500(385) IEC 751 -200 to 850

-200 to 200 0.20 0.16 0.36

200 to 600 0.32 0.22 0.54

600 to 850

0.40 0.27

0.67

Pt1000(385) IEC 751

-200 to 850

-200 to 200 0.1

0.05 0.25

200 to 600 0.2 0.10 0.42

600 to 850 0.27 0.14 0.54

Cu10(427) Minco Application Aid #18 -100 to 260 -100 to 260 0.61 0.56 0.61

Cu50(428) GOST 6651-94 -50 to 150 -50 to 150 0.17 0.13 0.17

Cu100(428) GOST 6651-94 -50 to 150 -50 to 150 0.12 0.09

0.12

Ni120(672) Edison curve #7 -100 to 260 -100 to 260 0.07 0.05

0.07

Ni100(618) DIN 43760 -100 to 260 -100 to 260 0.08 0.06 0.08

* Additel/Land software can be downloaded for free at www.additel.com

Model Number

Accessories (included)

9816-X 110V/220V external power adapter 1 pc

9712 Chargeable Li-ion battery 1 pc

9022 Test leads 3 sets(6 pcs)

9020 Short circuit cable 1 sets(2 pcs)

9060

Pressure module connection cable

(only for 222A & 223A)

1 pc

Manual 1 pc

ISO 17025 accredited calibration

certicate

1 pc

Optional Accessories

Model number Description

ADT160A

(only for 222A & 223A)

Intelligent Digital Pressure Modules, see page 27

9060

(only for 222A & 223A)

Pressure module connection cable

9050 USB to RS232 (DB-9 Male) Adapter

9050-EXT RS 232 (DB9/M) extension cable, 9 feet

9080

Cable kit (including TC plug, compensation cable,

S,R,B,K,J,T,E,N)

9712

Spare chargeable Li-ion battery for multifunction

calibrator

9816

110 V/220 V external power adapter for ADT22X

and ADT672 calibrator

9906 Carrying case for multifunction calibrator

9510

Additel/Cal Task management software for

multifunction calibrator

ADT222A

ADT223A

ADT221A