Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

Multifunction Process Calibrator

Additel 226, 226Ex

Sourcing, Simulating and Measuring Pressure,

Temperature and Electrical Signals

Built-in Barometer

Intrinsically Safe Models Available (Ex)

Large Smartphone Like Touchscreen User Experience

USB Type-C and Bluetooth Communications

IP67 Rated

High Voltage Measurement Capability (300V AC)

True RMS Voltage Meter Capability

Dual Channel Pressure Module Ports

High Static Differential Pressure Measurement 0.002% FS

ISO 17025-accredited Calibration w/data Included

OVERVIEW

Additel’s new Multi-functional Process Calibrator series takes portability, functionality, and accuracy to a whole new level

and packages it with an intuitive and easy to use color touchscreen display. The ADT226 is a powerful yet cost effective

process calibrator, which has an ATEX certied intrinsically safe option - ADT226Ex allowing you to perform calibration

work in the harshest of environments. We’re condent these new tools will not only meet your calibration requirements

but will make metrology simple for you!

Features

Easy-to-use Cellphone Like Interface

Additel's new and improved ADT226 series provides much improved

accuracies including an electrical accuracy of 0.015% RD + 0.005% FS,

high-static differential pressure mode accuracy to 0.002% FS and across

the board improvements in temperature measurement accuracies.

The ADT226 series brings an all new user interface to the world of process

calibrators. With a menu driven interface and small size/weight, the ADT226

is the industry's smallest multifunctional process calibrator with an intrinsically

safe version to boot (ADT226Ex).

It adopts advanced human hand engineering design for the most convenient

eld handheld process calibrator available. The ADT226 has been developed

with a powerful embedded operating system which solves common problems

of other designs including slow response, cumbersome key operation, high

power consumption and overall slow processing.

Accuracy

The ADT226 series delivers highly improved thermocouple measurement

capabilities by vastly improving the cold junction compensation(CJC)

specications and a much improved stabilization time.

Thermocouple Measurement Performance

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

The demands of remote calibration work can be challenging. The ADT226 series is

lightweight and highly portable and utilizes an advanced color LCD screen to help ensure

you can easily see, even in the (Ex) intrinsically safe versions.

All models in the ADT226 family have been designed with ruggedness and dependability in

mind and meet IP67 standards with a 1-meter drop test, 4G vibration, xenon exposure and

130g steel ball drop testing of the display.

Other environmental conditions have also been considered, such as temperature and

humidity. To combat these external elements, Additel has designed a unique internal circuit

design and process technology to allow for the utmost condence in your critical calibration

and measurement work.

The Additel 226Ex series calibrators have passed the most stringent testing by

certified organizations to acquire intrinsically safe certificates, ATEX, IECEX.

The explosion-proof grade (Ex ia IIC T4 Ga), can be widely used in potentially

explosive environments, such as oil and gas platforms, oil refineries, chemical

and petrochemical plants, pharmaceutical industries, energy and gas processing

industries.

Each intrinsically safe calibrator has an advanced transective color LCD display

which has enhanced visibility when viewed in direct sunlight. No matter where your

work takes you, these calibrators are up to the task.

The Additel 226 non-Ex version is equipped with “true effective

value” RMS measuring function, which can measure the RMS

of various waveforms with no need to consider distortion or

waveform parameters and other errors caused by various

waveforms

The onboard applications provide a useful selection of features including high static

differential pressure mode, pressure leak test, safety valve test, analog transmitter

calibration, unit converter, thermal calculator, and snapshots to name a few.

High static differential pressure mode uses two sensors, unique calculation technology to

achieve a differential pressure measurement to 0.002% FS at high static pressures. The

leak test will automatically calculate the pressure drop to determine a leak condition. The

safety valve test is a specialized task which captures the exact pressure release point by

taking 10 readings per second during a valve crack test.

You will nd this and much more as we continue to develop new apps at Additel.

Features

Portable and Robust

Intrinsically Safe Option

Voltage Meter (RMS)

Targeted Application Features

Users can remotely connect mobile devices to the ADT226 via Bluetooth with an

unobstructed distance up 20 meters. The included USB type-C comm port and cable

provide a hard wired communication option as well as charging for the removeable Li-ion

battery, which provides up to 12 hours of run time.

In addition to all the great features mentioned above, the ADT226 series is loaded with time saving

features like our builtin pressure and temperature converter, thermal calculator, wiring diagram

guide for assisting with electrical connections, a built-in diagnostic center including intelligent alarm

messaging and a real time error report and comprehensive selftesting to help our customers get the

very most out of their investment in Additel calibration tools.

Connectivity & Battery

Time Saving Features

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

SPECIFICATIONS

Source Accuracy

Specifications

ADT226 ADT226Ex

Range Resolution Accuracy Range Resolution Accuracy

Voltage DC

-150 to 150 mV 5 uV 0.015%RDG + 15 uV

0 to 10.5 V 0.2 mV 0.02%RDG + 0.5 mV

-1.5 to 1.5 V 0.05 mV 0.015%RDG + 0.15 mV

-15 to 15 V 0.5 mV 0.015%RDG + 1.5 mV

Current DC 0 to 25 mA 0.5 uA 0.015%RDG + 1.2 uA 0 to 25 mA 0.5 uA 0.02%RDG + 1.2 uA

Resistance

0 to 400 Ω 10 mΩ 0.015%RDG + 20 mΩ 0 to 400 Ω 10 mΩ 0.02%RDG + 20 mΩ

0 to 4000 Ω 100 mΩ 0.015%RDG + 200 mΩ 0 to 4000 Ω 100mΩ 0.02%RDG + 200 mΩ

Frequency

(Square wave)

(0.01 ~ 5) Hz 0.00001 Hz 0.005%RDG + 0.00005 Hz (0.01 ~ 5) Hz 0.00001 Hz 0.005%RDG + 0.00005 Hz

(5 ~ 50) Hz 0.0001 Hz 0.005%RDG + 0.0005 Hz (5 ~ 50) Hz 0.0001 Hz 0.005%RDG + 0.0005 Hz

(50 ~ 500) Hz 0.001 Hz 0.005%RDG + 0.005 Hz (50 ~ 500) Hz 0.001 Hz 0.005%RDG + 0.005 Hz

(500 ~ 5000) Hz 0.01 Hz

0.005%RDG + 0.05 Hz

(500 ~ 5000) Hz 0.01 Hz

0.005%RDG + 0.05 Hz

（

5000 ~ 50000) Hz 0.1 Hz 0.005%RDG + 0.5 Hz

（

5000 ~ 50000) Hz 0.1 Hz 0.005%RDG + 0.5 Hz

Frequency

(Sine wave &

Triangular wave)

(0.1~ 50) Hz 0.001 Hz 0.004 Hz

N/A

(50 ~ 500) Hz 0.01 Hz 0.04 Hz

(500 ~ 5000) Hz 0.1 Hz 0.4 Hz

(5000 ~ 50000) Hz 1Hz 4 Hz

Duty Cycle

(1%~99%)@≤10000Hz 0.05%

0.1% / kHz + 0.1% Fixed 50%@(0.01~50000)Hz

(5%~99%)@≤50000Hz 0.5%

Voltage mV (TC) -10 to 75 mV 1.5 uV 0.015%RDG + 4.0 uV -10 to 75 mV 1.5 uV 0.02%RDG + 4.0 uV

Pulse

0 to 9999999 1 N/A 0 to 9999999 1 N/A

Optional rising edge and falling edge, minimum threshold voltage: 2.5V

Loop power (max

25mA)

24 V N/A ±1 V 22 V N/A ± 10%

Electrical Specification

Note 1: When the environment temperature is (-10

～

+10)

℃

and (30

～

50)

℃

, the temperature coefcient is:

Voltage, current, thermocouple, thermal resistance output: ± 5 ppm FS/

℃

(for Non-Ex version);

When the environment temperature is (-20

～

-10)

℃

, the temperature coefcient is:

Voltage, current, thermocouple, thermal resistance output: ± 5 ppm FS/

℃

(for Ex version);

Note 2: Output features:

Voltage output : ±150 mV /±1.5V / ± 15V, Maximum load current: 10 mA, (For Ex-version load current 5mA), load effect: 50 uV / mA;

Current output (0

～

25) mA: Maximum open circuit voltage: 24 V, driving capacity: 1 kΩ / 20 mA, maximum external voltage: 50 V;

(For Ex-version,Maximum open circuit voltage: 15 V, impedance: 400Ω, driving capacity: 6 V / 20 mA, maximum external voltage: 30 V

）

Frequency output: square wave, adjustable duty cycle, square wave amplitude (0~15) V adjustable, amplitude accuracy ± 0.2%FS(for Non-Ex version);

Frequency output: square wave, 50% duty cycle, square wave amplitude (0~10.5) V adjustable, amplitude accuracy ± 0.2%FS(for Ex version);

maximum load current: 10mA ( For Ex-version,1mA);

Supported units: Hz, kHz, MHz, CPM, CPH, s, ms ;

Zero-crossing sine wave / triangular wave amplitude: (0.1

～

30) Vp-p adjustable(only for Non-Ex version),

Amplitude accuracy 3 % Vp-p + 75 mV, supporting display valid value.

[1]

Thermocouple output: maximum load current: 5mA, load effect: < 5 uV / mA;

Thermal resistance output: maximum excitation current: Iex*400<1.6V(0 ~ 400) Ω, Iex*Rsim<1.6V(400 ~ 4000) Ω;

minimum excitation current: 0.2 mA@(0 ~ 400) Ω, 0.1 mA@(400 ~ 4000) Ω ;

support 1ms pulse excitation. (For Non-Ex version

）

Thermal resistance output: Excitation current: (0.2~2) mA@(0 ~ 400) Ω, (0.1~0.3) mA@(400 ~ 4000) Ω ;

support 1ms pulse excitation. (For Ex version

）

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

Measurement Accuracy Cont.

Specifications

ADT226 ADT226Ex

Range Resolution Accuracy Range Resolution Accuracy

Voltage DC

-300 to 300 mV 1 µV 0.015% RDG + 15 µV -300 to 300 mV 1µV

0.02% RDG + 15 µV

-30 to 30 V 0.1 mV 0.015%RDG + 1.5 mV -30 to 30 V 0.1 mV 0.02% RDG + 1.5 mV

Impedance: -300 mV to 300 mV = > 100 MΩ

-30 V to 30 V = >1 MΩ

DC High Voltage

-300 to 300 V 10 mV 0.05% RDG + 30 mV

N/A

The highest input voltage is 300 V, IEC61010 300V CATII

Common mode rejection: >100 dB (at 50 or 60 Hz)

Impedance: > 4 MΩ, DC coupling

AC High Voltage

300V (40 to 500 Hz) 10 mV 0.5% RDG + 150 mV

N/A

The highest input voltage is 300 V, IEC61010 300V CATII

9% to 100% of range is suitable for the above accuracy indicators

Impedance: >4 MΩ, <100pF, AC coupling

Current DC -30 to 30 mA 0.1 μA 0.015% RDG + 1.5 µA -30 to 30 mA 0.1 μA 0.02% RDG + 1.5 µA

Resistance

(4-Wire)

0 to 400 Ω 1 mΩ 0.015% RDG + 20 mΩ 0 to 400 Ω 1 mΩ 0.02% RDG + 20 mΩ

0 to 4000 Ω 10 mΩ 0.015% RDG + 200 mΩ 0 to 4000 Ω 10 mΩ 0.02% RDG + 200 mΩ

2-Wire + 50 mΩ, 3-wire + 10 mΩ

Excitation current: 0.2 mA

Voltage mV (TC)

-10 to 75 mV 0.1uV 0.015% RDG + 4.0 µV -10 to 75 mV 0.1uV

0.02% RDG + 4.0 µV

Impedance: >100 MΩ

Frequency

(0.01 ~ 5) Hz 0.00001 Hz 0.005%RDG + 0.00005 Hz (0.01 ~ 5) Hz 0.00001 Hz 0.005%RDG + 0.00005 Hz

(5 ~ 50) Hz 0.0001 Hz 0.005%RDG + 0.0005 Hz (5 ~ 50) Hz 0.0001 Hz 0.005%RDG + 0.0005 Hz

(50 ~ 500) Hz 0.001 Hz 0.005%RDG + 0.005 Hz (50 ~ 500) Hz 0.001 Hz 0.005%RDG + 0.005 Hz

(500 ~ 5000) Hz 0.01 Hz 0.005%RDG + 0.05 Hz (500 ~ 5000) Hz 0.01 Hz 0.005%RDG + 0.05 Hz

(5000 ~ 50000) Hz 0.1 Hz 0.005%RDG + 0.5 Hz (5000 ~ 50000) Hz 0.1 Hz 0.005%RDG + 0.5 Hz

Minimum threshold voltage: 2.5 V

Supported units: Hz, kHz, MHz, CPM, CPH, s, ms, µs

Duty Cycle

(1%~99%)@≤10000Hz 0.01%

0.1% kHz + 0.05% N/A

(5%~99%)@≤50000Hz 0.1%

Pulse

0 to 9999999 1 N/A 0 to 9999999 1

N/A

Optional rising edge and falling edge, minimum threshold voltage: 2.5V

Switch Support for dry or wet switch, voltage range of 3 to 30 V, response speed of < 10 ms

SPECIFICATIONS

Note 1: When the environment temperature is (-10

～

+10)

℃

and (30

～

50)

℃

, the temperature coefcient is:

Voltage, current, thermocouple, thermal resistance output: ± 5 ppm FS/

℃

(for Non-Ex version);

When the environment temperature is (-20

～

-10)

℃

, the temperature coefcient is:

Voltage, current, thermocouple, thermal resistance output: ± 5 ppm FS/

℃

(for Ex version);

AC High Voltage TRMS measurement: ± (250 ppmRDG + 25 ppmFS)/

℃;

DC High Voltage measurement:± 25ppmFS/

℃.

Note 2: Input features:

Voltage range: (-300 ~ 300) mV, input impedance >100 MΩ; (-30 ~ 30) V, input impedance >1MΩ;

Current measurement: input impedance < 40 Ω;

TC measurement: input impedance >100 MΩ;

AC High Voltage TRMS measurement: input impedance: > 4MΩ , <100pF, AC coupling; Maximum input voltage: 300 V, IEC61010 300V CATII;

9% ~ 100% of the range is applicable to the accuracy index above.

DC High Voltage measurement: > 4 MΩ, DC coupling; Maximum input voltage: 300 V, IEC61010 300V CATII; Common-mode rejection:>100 dB

（

in 50 or 60 Hz

）

Note 3

The thermal resistance measurement excitation power supply is 0.2mA. There are four wire system, three wire system and two wire system measurement modes

at each gear position. The accuracy indicators are as follows

：

The accuracy data given in the table is the accuracy data in 4-line system

；

3-wire system accuracy is +10 mΩ on the basis of 4-wire system accuracy;

2-wire accuracy is +50 mΩ on the basis of 4-wire accuracy;

Note 4: Minimum threshold voltage for frequency and pulse measurement: 2.5V;

Note 5: Frequency measurement unit: Hz, kHz, MHz, CPM, CPH, s, ms, µs;

Note 6: Optional rising edge or descending edge trigger mode for pulse measurement.

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

Specifications

ADT226 ADT226Ex

Operating Temperature -10°C to 50°C -20°C to 50°C

Specification guaranteed

temperature range

10°C to 30°C -10°C to 50°C

Storage Temperature

-30°C to 70°C -30°C to 70°C

Humidity <95%, non-condensing <95%, non-condensing

Power supply

6600mAh, 23.8Wh lithium battery, charging time about 6

hours, battery pack can be charged independently

4000mAh 14.4Wh Explosion-proof lithium battery packcharging time

about 6 hours, battery pack can be charged independently

User interface

Icon drive menus Icon driven menus with navigation buttons

Ports protection voltage

50V max

（

Only for the top ports)

30V max

Display 5.0 inch 480 x 800 mm TFT LCD capacitive screen 4.4 inch 640 x 480 mm color display capacitive screen

Maximum altitude 3000 meters

European Compliance CE Mark

Electrical Connection Ø4mm sockets and at mini-jack thermocouple socket

Size 6.97" x 4.13" x 2.04" (177 mm x 105 mm x 52 mm)

Weight 1.6 lb (0.7 kg) 1.65 lb (0.75Kg)

Battery Rechargeable Li-ion battery (included)

Battery Life Typically 12 hours Typically 35 hours

Battery Charge

110V/220V external power adapter included. Battery can be charged external to the unit.

External pressure module Dual channel Serial plug, can connect two digital pressure modules

Warm-up time Full specication performance is achieved after a 10 minute warm-up time.

ROHS compliant Rohs II Directive 2011/65/EU, EN50581:2012

Display rate 3 readings per second

Barometric Accuracy

(Built-in barometer)

55Pa

IP protection level IP67, 1 meter drop test

Communication Isolate USB-TYPEC (slave), Bluetooth BLE

User Interface

Localization

English, German, French, Italian, Spanish, Portuguese,

Simplied Chinese, Traditional Chinese, Japanese,

Russian, Czech, Slovak

English, Simplied Chinese, Traditional Chinese, Japanese

Calibration

ISO 17025 accredited calibration with data

Warranty 3 years

General Specification

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

Temperature Specification

SPECIFICATIONS

Thermocouple Measurement and Source Accuracy

ADT226 ADT226Ex

Type Standard Temperature Range (

Accuracy (

Standard Temperature Range (

Accuracy (

Measure / Source Measure / Source

S IEC 584 -50 to 1768

-50~0 0.96

IEC 584 -50 to 1768

-50~100 0.96

0~100 0.69 100~1000 0.69

100~1768 0.64 1000~1768 0.73

R IEC 584 -50 to 1768

-50~0

1.02

IEC 584 -50 to 1768

-50~0 1.03

0~200 0.71 0~200 0.71

200~1768 0.56 200~1768 0.65

B IEC 584 0 to 1820

200~300 1.89

IEC 584 0 to 1820

200~300 1.90

300~500

1.25 300~500 1.26

500~800 0.78 500~800 0.79

800~1820 0.55 800~1820 0.57

IEC 584

-270 to 1372

-250 to -200 0.97

IEC 584

-270 to 1372

-250 to -200 1.04

-200 to -100 0.30 -200 to -100 0.32

-100 to 600 0.18 -100 to 600 0.21

600 to 1372 0.35 600 to 1372 0.43

N IEC 584 -270 to 1300

-250 to -200 1.50

IEC 584 -270 to 1300

-250 to -200 1.58

-200 to -100 0.44 -200 to -100 0.46

-100 to 1300 0.30 -100 to 1300 0.37

E IEC 584 -270 to 1000

-250~-200 0.54

IEC 584 -270 to 1000

-250~-200 0.59

-200~-100 0.20 -200~-100 0.22

-100~700 0.15 -100~700 0.18

700~1000 0.20 700~1000 0.25

IEC 584 -210~1200

-210~-100 0.26

IEC 584 -210~1200

-210~-100 0.28

-100~700 0.15 -100~700 0.19

700~1200 0.25 700~1200 0.31

T IEC 584 -270 to 400

-250~-100 0.74

IEC 584 -270 to 400

-250~-100 0.79

-100~0 0.15 -100~0 0.16

0~400 0.11 0~400 0.13

C ASTM E988 0 to 2315

0 to 1000 0.35

ASTM E988 0 to 2315

0 to 1000 0.40

1000 to 1800 0.62 1000 to 1800 0.73

1800 to 2315 1.02 1800 to 2315 1.22

D ASTM E988 0~2315

0~100 0.39

ASTM E988 0~2315

0~100 0.39

100~1200 0.37 100~1200 0.43

1200~2000 0.65 1200~2000 0.77

2000~2315 1.03 2000~2315 1.24

G ASTM E1751 0 to 2315

50~100 1.12

ASTM E1751 0 to 2315

50~100 1.12

100~200 0.72 100~200 0.72

200~400 0.45 200~400 0.46

400~1500 0.37 400~1500 0.43

1500~2315 0.77 1500~2315 0.92

L DIN43710 -200 to 900

-200 to -100 0.15

DIN43710 -200 to 900

-200 to -100 0.16

-100 to 400 0.13 -100 to 400 0.14

400 to 900 0.17 400 to 900 0.20

U DIN43710 -200 to 600

-200 to 0 0.28

DIN43710 -200 to 600

-200 to 0 0.29

0 to 600 0.13 0 to 600 0.15

Note: Internal CJC is ±0.2°C (-10°C to 50°C ambient temperature)

Accuracy with external cold junction only, for internal cold junction add 0.2°C (k=2)

Pressure Specification( ADT226 & ADT226Ex)

The 161 series Intelligent Digital Pressure Modules are available for gauge, vacuum and absolute pressure from -15 psi to 60,000 psi (-1 bar to 4200 bar).

Accuracy from 0.02% FS includes operation over 14°F to 122°F (-10°C to 50°C), one year stability and calibration uncertainty. For detailed specications,

please refer to the pressure modules datasheet.

Pressure Specification

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

RTD Measurement and Source Accuracy

Measure and Simulate Temperature Range (°C)

Accuracy (°C)

ADT226 ADT226Ex

PT10(385) -200 to 850

-200~200 0.62 0.64

200~600 0.77 0.82

600~850 0.88 0.95

PT25(385) -200 to 850

-200~200 0.29 0.31

200~600 0.40 0.44

600~850 0.47 0.54

PT50(3916) -200 to 850

-200~200 0.18 0.20

200~600 0.27 0.32

600~850

0.34

0.40

PT100(385)

PT100(391)

PT100(3916)

PT100(3926)

-200 to 850

-200~200 0.13 0.15

200~600 0.21

0.26

600~850 0.27 0.34

PT200(385) -200 to 850

-200~200 0.34 0.37

200~300

0.37 0.40

300~600 0.46 0.51

600~850 0.54 0.61

PT400(385) -200 to 850

-200~0 0.17 0.18

0~200 0.21 0.23

200~600 0.30 0.35

600~850 0.37 0.44

PT500(385) -200 to 850

-200~200 0.18 0.20

200~600 0.27 0.32

600~850 0.34 0.40

PT1000(385) -200 to 850

-200~200 0.13 0.15

200~600 0.21 0.26

600~850 0.27 0.34

Cu10(427) -200~260 -200~260 0.59 0.61

Cu50(428) --200~260 -200~260 0.15 0.17

Cu100(428) -200~260 -200~260 0.10 0.12

Ni100(617)

Ni100(618)

-60~180

-60~0 0.06 0.07

0~180 0.06 0.08

Ni120(672) --80~260 -80~260 0.06 0.07

Ni1000 -50~150 -50~150 0.08 0.09

*Note: Ambient temperature of 20°C±10°C.

4-wire accuracy. For 2-wire add 50 mΩ, for 3-wire add 10 mΩ

SPECIFICATIONS

Pressure / Process Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20240109

ORDERING INFORMATION

* Additel/Land software can be downloaded for free at www.additel.com

Model Number

Accessories (included)

Model number Description QTY Picture

9811-X

110V/220V external power adapter

(Only for ADT226

226P)

1 pc

9811Ex-X

110V/220V external power adapter

(Only for ADT226Ex )

1 pc

9704

Chargeable Li-ion battery

(Only for ADT226, 226P)

1 pc

9704Ex

Chargeable Li-ion battery

(Only for ADT226Ex )

1 pc

9023 Test leads

1 set

(6 pcs)

9027

Right angle test leads

(Non-Ex models only)

1 set

(2 pcs)

9060 Pressure module connection cable 1 pc

9052

USB Cable type A to type C

(Non-Ex models only)

1 pc

9052Ex

Ex USB Cable type A to type C

(For Ex models only)

1 pc

9040 Hanging strap with magnet 1 pc

9028

Multimeter Test Hook, Flexible Electronic

Probe

1 set

(2 pcs)

ISO 17025 accredited calibration certicate 1 pc

ADT226

ADT226Ex: Intrisically Safe

ADT226P: Panel Mount

Optional Accessories

Model number Description Picture

ADT161 - XXX Digital Pressure Modules 9082

HART 250 ohm resistor adapter for

ADT226, 226Pand ADT227, 227P

ADT161Ex - XXX

Intrinsically Safe Digital Pressure

Modules

9704

Battery, rechargeable Li-ion polymer

battery for Additel Handheld Series

ADT129-X

Differential Pressure Manifold, -15 to

3,000 psi

9704Ex

Battery, rechargeable Li-ion polymer

battery for Ex Additel Handheld Series

9061

Current output cable (for ADT226,

226P and ADT227, 227P)

9811-X

110 V/220 V external power adapter

for handheld models

9062

Connection adapter cable for Fluke

style pressure modules to non-

explosion-proof Additel readouts

9811Ex-X

110 V/220 V external power adapter

for Ex handheld models

AM1602-6FT

Class A, PT100/385 Industrial RTD,

-40°C to 160°C, 3/16 (4.76 mm)

inch x 2 inch (50 mm) with 6 foot

(1.8 Meters) cable w/ banana jack

connectors

9906A

Hard carrying case for handheld

instrument with accessories

9080

Cable kit (including TC plug,

compensation cable, S,R,K,J,T,E,N)

9918-SC

Soft carrying case, with space for

handheld instrument, test leads, and

accessories

9081

Universal TC easy-press adapter for

ADT226, 226P and ADT227, 227P

9530-BASIC

Additel/Acal Task management

software for multifunction calibrator

9530-NET

Additel/Acal Automated calibration

software with asset management,

network version, Includes server

installation and 1 user license

Panel Mount Version