Temperature Calibration Equipment

Corporate Headquarters

2900 Saturn Street #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20211206

AccuMac AM1210

Reference Standard Type S Thermocouple

OVERVIEW

The AM1210 Reference Standard Type S Thermocouple is made from reference grade platinum and platinum-rhodium

alloy. It covers a temperature range from 0°C to 1300°C with a short term stability of <0.2°C all the way to the Freez-

ing Point of Copper (1084.62°C). It is commonly used as a reference standard to calibrate industrial thermocouples.

All thermocouple wires and parts are specially cleaned and annealed before assembly. Every AM1210 thermocouple is

fully annealed and tested again after assembly to meet the tolerance criteria as specied below:

E(tCu)=10.575 ±0.015

E(tAl)=5.860+0.37(E(tCu)-10.575) ±0.005

E(tZn)=3.447+0.18(E(tCu)-10.575) ±0.005

SPECIFICATIONS

Affordable Reference Standard

Type S

Short-term Stability: <0.2

at 1084.62

Temperature Range: 0

to 1300

ORDERING INFORMATION

AM1210

Model Number

AM1210-20 AM1210-12

Temperature Range 0°C to 1300°C

Type Type S: Platinum/10% Rhodium vs. Platinum

Long Term Drift* <0.5°C at 1210°C after 1 year typical usage

Tolerance (mV)

E(tCu)=10.575 ±0.015

E(tAl)=5.860+0.37(E(tCu)-10.575) ±0.005

E(tZn)=3.447+0.18(E(tCu)-10.575) ±0.005

Short Term Stability <0.2°C at 1084.62°C

Diameter of thermocouple wire

0.02 in (0.5 mm)

Sheath Material Alumina

Sheath Dimensions

0.236 in (6mm) (OD) x 19.68 in (500 mm) (L) 0.236 in (6mm) (OD) x 11.81 in (300 mm) (L)

Total TC Wire Length

47.25 in (1200 mm) 39.37 in (1000 mm)

Documentation** Report of test with data

*Long-term drift rate is for reference only. It could be affected by such facts as handling, application, and maintenance, etc.

** For 17025 accredited calibration, please contact Additel.

20 - 19.68 inch (500 mm)

12 - 11.81 inch (300 mm)

AM1210

CJ – cold junction

17025

Accredited Calibration

(Optional)

Note: Carrying case included